FOLLOW ME
Landing Light / 12V-28V
420,00 €
FOLLOW ME
Landing Light
Landing Light Follow Me is landing light (white) which covers all the required spectrum - the terrain and runway ahead during takeoff and landing procedure. The light is very compact and efficient, always ensuring you to have extremely clear visibility.
↓↓ Hover the mouse and see the effect↓↓
01
MULTI PROTECTION
Anodized alluminium encapsulation ensures that the lamp is water and vibration resistant. The state of art construction does not allow any dust to come into the lamp and moreover its electronics is protected against reverse polarity connection.
02
HIGH BRIGHTNESS
Advanced optics together with special reflection system and high brightness CREE LEDs are providing outstanding performance and brightness output much higher than required.
ALL ELECTRONIC
INTEGRATED
INTEGRATED
WATER AND
DUST PROOF
DUST PROOF
SHOCK
PROOF
PROOF
LOW POWER
CONSUMPTION
CONSUMPTION
RADIO
INTERFERENCE-FREE
INTERFERENCE-FREE
12V - 28V
VOLTAGE RANGE
VOLTAGE RANGE
TECHNICAL DATA
Voltage range | 11,8 V - 14,8 V |
Dimensions | 71mm x 61mm + bracket |
Weight | 330 g |
Operation temperature range | - 20°C to + 80°C |
Current | 2,8(13,5VDC) - 1,4(27VDC) |
Input power | 38 W |
Light angle (2 lamps) | 12° narrow range (per each) |
Light angle (1 lamp) | 30° wide range |
Light Luminosity | 8000 lm |
Converter | Built in |
Glass type | Pixelglass (6mm, lens system) |
Wiring requirement | 1mm2 cable |
Encapsulation | Monolith of UV resistant epoxy resin |
Strobe control unit | Lamp built in |
Reverse polarity protection | YES |
Vibration resistance | YES |
Water resistance | YES |
Warranty | 2 years |
980 Przedmioty