TAIL STAR
TAIL STAR
LED strobe/position light
Tail Star light is position light (white) with strobe feature. It is designed for LSA, Ultralight, KIT and Experimental
aircraft.
The light is very compact and efficient, always ensuring you to be clearly visible in the air. Tail Star can work as:
- position (white) light only
- strobe (white) light only
- position and strobe light at the same time
↓↓ Hover the mouse and see the effect↓↓
01
INTEGRATED STROBE CONTROLLER
New generation of Tail Star is having strobe light controller integrated in the lamp capsule. Now installation and connection process is much faster, easier and you don't have to look for an extra space for external flash controller.
02
MULTI PROTECTION
Tail Star monolith encapsulation ensures that the lamp is water and vibration resistant. The state of art construction does not allow any dust to come into the lamp and moreover its electronics is protected against reverse polarity connection.
03
HIGH BRIGHTNESS
Advanced optics together with special reflection system and high brightness CREE LEDs are providing outstanding performance and brightness output much higher than required.
INTEGRATED
DUST PROOF
PROOF
CONSUMPTION
INTERFERENCE-FREE
VOLTAGE RANGE
Find below features of our models to fulfill your needs entirely
| NAVIGATOR | NAVIGATOR ULTRA |
NAVIGATOR ULTRA 360 |
SKY NAV 360 |
SKY NAV | |
| NAVIGATION LIGHT (RED/GREEN) |
 |
|
|
|
|
| REAR POSITION LIGHT (WHITE) |
|
|
|||
| STROBE | |
|
|
|
|
| 12V-15V VOLTAGE | |
|
|||
| 12V-18V VOLTAGE | |
||||
| 12V-28V VOLTAGE | |
|
|||
| SYNCHRONIZATION | |
|
|
|
Haven’t you decided yet which lights you need? No problem! Please check our lights comparison showing features in each model. Based on that, you will be able to decide which lights fulfill your requirements entirely.
TECHNICAL DATA
| Position light function | YES (White) |
| Strobe light function | YES (White) |
| Voltage range | 11,8 V - 14,8 V |
| Weight (2 lamps) | 50 g |
| Operation temperature range | - 35°C to + 60°C |
| Current - position light | 0,4 A |
| Current - strobe light | 3.4 A in peak |
| Input power - position light | 5 W |
| Input power - strobe light | 40 W in peak |
| Position Light angle | 140° |
| Position light luminosity | 450 lm |
| Strobe Light Luminosity | 2000 lm |
| Flash frequency | 120 flashes/min |
| Wiring requirement | 0,5mm2 cable |
| Encapsulation | Monolith of UV resistant epoxy resin |
| Strobe control unit | Lamp built in |
| Reverse polarity protection | YES |
| Warranty | 2 years |
DOWNLOAD 3D MODEL
