Set of wingtip navigation / strobe lights / 12V-15V
Set of wingtip navigation lights / 12V-28V
Wingtip LED navigation light
Navigator wingtip lights are navigation lights (red & green) designed for LSA, Ultralight, KIT and Experimental
aircraft. The lights are very compact and efficient, always ensuring you to be clearly visible in the air.
↓↓ Hover the mouse and see the effect↓↓
LOW POWER CONSUMPTION
Navigator lights made in LED technology are definitely brighter than traditional bulbs. In addition, the required power consumption is definitely lower and does not significantly affect the overall energy balance of your aircraft.
Navigator monolith encapsulation ensures that the lamp is water and vibration resistant. The state of art construction does not allow any dust to come into the lamp and moreover its electronics is protected against reverse polarity connection.
Advanced optics together with special reflection system and high brightness CREE LEDs are providing outstanding performance and brightness output much higher than required.
Find below features of our models to fulfill your needs entirely
|REAR POSITION LIGHT
Haven’t you decided yet which lights you need? No problem! Please check our lights comparison showing features in each model. Based on that, you will be able to decide which lights fulfill your requirements entirely.
|Navigation light||YES (red/green)|
|Voltage range||11,8 V - 28 V|
|Weight (2 lamps)||150 g|
|Operation temperature range||35°C to + 60°C|
|Current - navigation light (2 lamps)||0,4 A|
|Input power - navigation light (2 lamps)||5,0 W|
|Navigation light angle||110°|
|Navigation light luminosity (per lamp)||450 lm|
|Wiring requirement||0,5 mm2 cable|
|Encapsulation||Monolith of UV resistant epoxy resin|
|Reverse polarity protection||YES|
DOWNLOAD 3D MODEL
You might also like
Set of wingtip navigation / position / strobe lights / 12V-15V