Landing Light Follow Me is landing light (white) which covers all the required spectrum - the terrain and runway ahead during takeoff and landing procedure. The light is very compact and efficient, always ensuring you to have extremely clear visibility.
↓↓ Hover the mouse and see the effect↓↓
Anodized alluminium encapsulation ensures that the lamp is water and vibration resistant. The state of art construction does not allow any dust to come into the lamp and moreover its electronics is protected against reverse polarity connection.
Advanced optics together with special reflection system and high brightness CREE LEDs are providing outstanding performance and brightness output much higher than required.
|Voltage range||11,8 V - 14,8 V|
|Dimensions||71mm x 61mm + bracket|
|Operation temperature range||- 20°C to + 80°C|
|Current||2,8(13,5VDC) - 1,4(27VDC)|
|Input power||38 W|
|Light angle (2 lamps)||12° narrow range (per each)|
|Light angle (1 lamp)||30° wide range|
|Light Luminosity||8000 lm|
|Glass type||Pixelglass (6mm, lens system)|
|Wiring requirement||1mm2 cable|
|Encapsulation||Monolith of UV resistant epoxy resin|
|Strobe control unit||Lamp built in|
|Reverse polarity protection||YES|